Products
For Automotive Industries
Paint Booth and Air Supply Unit
In the paint shop, the booth is the most important equipment where the paint is applied to the job. The paint booth and the air supply unit consume approximately 60% of the energy in the entire paint shop. Therefore the performance of the equipment has a large effect on the quality and energy performance of the paint shop as a whole.
Parker Engineering provides the advanced equipment with drastic energy savings such as the latest waterborne 3C2B process and a recirculated air system with EcoDryScrubber, a technology for the dry separation of paint overspray.
Parker Engineering provides the advanced equipment with drastic energy savings such as the latest waterborne 3C2B process and a recirculated air system with EcoDryScrubber, a technology for the dry separation of paint overspray.
Dray Cube
Innovation in Paint Proses
The mist dust collection method for the painting booth is changed from the conventional wet type to the dry type in view of environmental measures and convenience.
Review is ongoing.
With the arrester pad manufacturing and technical know-how accumulated over many years in parker engineering.
We have developed DRYCUBE, a large booth-enabled filter. Plastics for optimal use of DRYCUBE filters in parker engineering We propose and provide a point. Painting booths are undergoing a review from the conventional wet type to a dry type for environmental protection and convenience.
At our company, we make use of the technology and know-how cultivated with arrester pads to create filters for large booths.
We have developed "DRY CUBE".(Pantent No. 6723677)
Features of Dry Cube :
1. Assembled filter
2. Easy-to-handle size
3. Supports large air volume processing
4. High dust collection efficiency
5. Capturing a large amount of paint mist
6. Compatible with a wide range of paint types
7. Supports horizontal/vertical airflow direction
8. Compatible with internal secondary filter
9. Great for prefilters
*Performance varies depending on the type of paint
Review is ongoing.
With the arrester pad manufacturing and technical know-how accumulated over many years in parker engineering.
We have developed DRYCUBE, a large booth-enabled filter. Plastics for optimal use of DRYCUBE filters in parker engineering We propose and provide a point. Painting booths are undergoing a review from the conventional wet type to a dry type for environmental protection and convenience.
At our company, we make use of the technology and know-how cultivated with arrester pads to create filters for large booths.
We have developed "DRY CUBE".(Pantent No. 6723677)
Features of Dry Cube :
1. Assembled filter
2. Easy-to-handle size
3. Supports large air volume processing
4. High dust collection efficiency
5. Capturing a large amount of paint mist
6. Compatible with a wide range of paint types
7. Supports horizontal/vertical airflow direction
8. Compatible with internal secondary filter
9. Great for prefilters
*Performance varies depending on the type of paint
Panel installation
Comparison betwen convesional type and Dry Cube
Space efficiency at the booth when using Dry Cube
Specification
Cargo posture : 1040 x 525 x135 (mm) *2 with Filter
Body dimension : 500 x 500x530 (mm)
Body dimension : 500 x 500x530 (mm)
Compact Carry and storege
Exhaust recycle system
Energy savings with air recycling
Fresh air is supplied to the manned process and the exhaust is recycled to the automatic process. We can offer various systems that improve the recycling rate.
Heat pump
Energy savings and reduced CO2 emission with the heat pump
The water-borne paint is increasingly used in the automotive industry recent years. After application of water-borne paint, the flash-off process, which required energy savings, follows. We can offer a very energy efficient equipment through the direct expansion type heat pump system (cooling media directly transferred to the heat exchanger) (Patent pending)
Automatic retractable grating
This equipment is mainly used for the robot zone of the paint booth.When the production is ongoing, gratings are stored at the edge of the spray room to prevent the overspray from adhering to the gratings. When the production is stopped (maintenance) the gratings are extended towards the center for the convenience of the maintenance.
Paint sludge recovery system
Recovery system for floating/spreading paint sludge capable of water borne & solvent borne
We propose a paint sludge recovery system with chemical as a measure to extend the lifespan of circulation water of the water scrubber booth. We design the booth according to the custom-made chemical and can propose an optimized equipment for your production line.
A Parker Group company, Parker Corporation has developed CF agent (Crazy Flock), which offers the advantages of high speed condensation, high speed floating separation and high speed dehydration. Trials using your paint is possible at Matsubuse Plant of Parker Corporation.
